Permanent RGB
Minleon-Rainmin RGB+Line light strings and fixtures are manufactured for 4-season, year-round use. With a double-data line (so one bad pixel won't compromise the rest of the string), extra wire insulation, multiple mounting options (3-way track, Smart base, detachable-adjustable clips, molded clips & magnetized Pebbles light strings), and multiple control & App options for every price budget, Minleon's two decades of experience is primed & ready for both the commercial & prosumer markets.
P50H-Pebble Lights
The P50H, 4-wire Pebble is a new, deeper version that extends beyond its mounting track so the LEDs are visible from three sides.
Learn More
P50T-Pebble Lights
P50T Pebble Lights are 12-bit, 2-LED light strings featuring a double data line (so one bad pixel will not compromise the rest of the string) and an extra insulated wire for permanent installs.
Learn More
Dot+35L
At 28 lumens on warm white, the 35mm RGBW+ Dot is one of our brightest pixels. 3-LEDs & a magnified lens allow us to point the light string down, and light up the architecture, or mount high above the viewing area.
Learn More
Pixel Bars
Rainmin's Pixel Bars mix and blend the colors of the rainbow on a one-meter fixture. Individually control every 6 LEDs/5-inches in series via ArtNet or Rainmin WEC's. Connect 18 Pixel Bars (18-meters/60-feet) before injecting additional 24Vdc power for more distance.
Learn More
Magnetic Pebbles v1
16-bit commercial greyscale and dimming curve RGB pixel string, with 2 strong magnets on the backside for mounting.
Learn More
Pearl Lights
Snap these bright, 3-LED pixels onto your wire frames or Smart Base light strip for slick, animated, full-color effects.
Learn MoreMinleon's Competitive Advantage...
RGB-LED’s in a perfect world, pretty much run forever, though over time the light output will slowly get lower. Most LED’s all have about the same specs for hours, which is about 80% of initial brightness at 30,000 hours, and 70% around 50,000 hours. This is accurate for Minleon LED’s.
But just as important is the temperature the RGB-LED’s are running at. Higher temperatures will reduce the output faster. Minleon controls the power to our RGB-LED’s in software which limits the maximum temperature, thus extending the lifetime. This is one of our competitive advantages.
Most likely something else will fail long before the LED’s are a problem. This is why Minleon, over the years, has bulked up its wiring, improved the water-tightness of its base & switched to Twist-&-Lock connectors for all strings & connectors beginning with the inception of 2017’s RGB+Plus Line.
Running hours for a typical application:
50,000 hours = 2083 days or 8 years of 24-hour run-time at full brightness.
If used only 12 hours a day with typical effects they will last 3-6 times longer, or 24-48 years.
